3Com MSR 30, MSR 50 manual Rta template, Rta terminal, Hiding, TCP connections, Undo rta terminal

916CHAPTER 70: TERMINAL ACCESS CONFIGURATION COMMANDS

	By default, no source IP address is configured globally for TCP connections.
n	■ You can use this command to configure an IP address other than the outbound
	interface’s IP address of the initiating router as the TCP connection source IP
	address. Generally, the loopback interface or dialer interface of the router are
	used as the TCP connection source IP address for dial-up backup and address
	hiding.
	■ If a source IP address is also configured in a terminal template, this address is
	preferred as the source IP address for the corresponding terminal to establish
	TCP connections.
	■ After the global TCP connection source IP address is configured, a TCP
	connection must be reestablished for this address to take effect.

Example # Set the global TCP connection source IP address to 1.1.1.1.

<Sysname> system-view [Sysname] rta source-ip 1.1.1.1

rta template

Syntax rta template template-name

undo rta template template-name

View System view

Parameters template-name: Terminal template name, a string of 1 to 15 characters.

Description Use the rta template command to create a terminal template and enter terminal template view. If you specify an existing terminal template, you will enter the corresponding terminal template view.

Use the undo rta template command to delete a terminal template.

Example # Create terminal template abc and enter terminal template view.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc]

rta terminal

Syntax rta terminal template-name terminal-number

undo rta terminal

View Interface view

Parameters template-name: Terminal template name, a string of 1 to 15 characters.