3Com MSR 30, MSR 50 manual Display msdp sa-count

1370 CHAPTER 89: MSDP CONFIGURATION COMMANDS

display msdp sa-count

Syntax display msdp [ vpn-instancevpn-instance-name all-instance] sa-count[ as-number ]

View Any view

Parameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31 characters.

all-instance: Specifies all VPN instances.

as-number: AS number, in the range of 1 to 65535.

Description Use the display msdp sa-countcommand to view the number of SA messages in the MSDP cache.

This command gives the corresponding output only after the cache-sa-enablecommand is executed.

Related command: cache-sa-enable.

Example # View the number of SA messages in the MSDP cache in the public instance.

<Sysname> display msdp sa-count

MSDP Source-Active	Count Information of VPN-Instance: public net
Number of cached	Source-Active entries, counted by Peer
Peer’s Address	Number of SA

10.10.10.105

Number of source and group, counted by AS

AS	Number of source	Number of group
?	3	3

Total 5 Source-Active entries

Table 334 Description on the fields of the display msdp sa-count command

Field	Description
Number of cached Source-Active entries,	Number of SA messages counted by peer
counted by Peer
Peer’s Address	MSDP peer addresses
Number of SA	Number of SA messages from this peer
AS	Number of the AS where the MSDP peer is located.
	“?” indicates that the system was unable to obtain
	the AS number.
Number of source	Number of multicast sources from this AS
Number of group	Number of multicast groups from this AS