3Com MSR 50, MSR 30 manual Exchange-mode, Related command Id-type Example

	2161
Related command:	ike proposal and display ike proposal.
Example	# Use 56-bit DES in CBC mode as the encryption algorithm for IKE proposal 10.
	<Sysname> system-view
	[Sysname] ike proposal 10
	[Sysname-ike-proposal-10] encryption-algorithm des-cbc
exchange-mode
Syntax	exchange-mode { aggressive main }
	undo exchange-mode
View	IKE Peer view
Parameter	aggressive: Aggressive mode
	main: Main mode.
Description	Use the exchange-modecommand to select an IKE negotiation mode.
	Use the undo exchange-modecommand to restore the default.
	By default, main mode is used.
	Note that if the user at one end of an IPSec tunnel obtains IP address automatically
	(for example, a dial-up user), IKE negotiation mode must be set to aggressive. In
	this case, an SA can be created as long as the username and password are correct.
Related command:	id-type.
Example	# Specify that IKE negotiation works in main mode.
	<Sysname> system-view
	[Sysname] ike peer peer1
	[Sysname-ike-peer-peer1] exchange-mode main

id-type

Syntax	id-type { ip name }
	undo id-type
View	IKE Peer view
Parameter	ip: Uses an IP address as the ID in IKE negotiation.
	name: Uses a name as the ID in IKE negotiation.