Netopia CLI 874 manual Igmp Configuration Commands

2-70 Command Line Interface Commands Reference

IGMP Configuration Commands

Note: These commands are supported beginning with Firmware Version 8.5.1. IGMP Version 3 is supported beginning with Firmware Version 8.7.

IGMP Configuration Commands

igmp version ( v1 v2 v3 ) show igmp version

igmp snooping [ yes no ] no igmp snooping

show igmp snooping

igmp robustness value no igmp robustness show igmp robustness

igmp query-intvl value no query-intvl

show query-intvl

igmp query-response-intvl value no query-response-intvl

show query-response-intvl

igmp last-member-query-intvl value show igmp last-member-query-intvl

igmp last-member-query-count value show igmp last-member-query-count

igmp fast-leave [ yes no ] no igmp fast-leave

show igmp fast-leave

show igmp group

igmp wireless-m2u [ on off ]

igmp version ( v1 v2 v3 ) show igmp version

These commands allow you to set or show the querier's (LAN's) maximum IGMP version that will be used.