
2-102 Command Line Interface Commands Reference
The tag (i.e., name) of the DLCI defaults, in this case, to “DLCI 17”. To specify a different name, type:
frame-relay dlci 17 tag "My DLCI"
For descriptions of the other parameters available for configuration (and their default values) see the Motorola Netopia® Router User’s Reference Guide.
no
This command deletes the DLCI identified by number.
show
These commands allow you to change or display the Frame Relay Local Management Interface (LMI) type. The keywords ccitt and annexa are synonyms, as are the keywords ansi and annexd.
This command allows you to set the routers’s Frame Relay transmit injection management tim.
show
This command displays Frame Relay Local Management Interface (LMI) statistics.
Example: |
|
#show |
|
LMI Tx Status Enquiries: | 10 |
LMI Rx Status Responses: | 10 |
LMI Timeouts: | 0 |
LMI Errors: | 0 |
LMI Failures: | 0 |
show
This command displays the status of each Frame Relay permanent virtual circuit (pvc).
Example:
#show
DLCI: 16, status: active
DLCI: 17, status: active