Motorola Netopia® Router CLI Commands 2-113
show ip nat translation
This command displays the current sessions passing through network address translation.
Example:
#show ip nat translations
LAN IP | WAN IP | Rem IP | ||
10.1.32.127:57037 | 10.1.32.127:57037 | 204.152.184.72:123 | out UDP | 0:01 |
192.168.1.100:4956 | 10.1.32.127:49161 | 10.1.32.250:10 | out UDP | 0:02 |
192.168.1.100: | 10.1.32.127: | 10.1.32.45: | out ICMP | 8s |
10.1.32.127:23 | 10.1.32.127:23 | 10.1.32.250:1585 | in TCP | >10h |
Total entries in NAT cache: 4
Beginning with Firmware Version 8.3.3, the session lifetime in hours:minutes format is displayed. Indefinitely long sessions greater than 10 hours, are shown as ">10h".