Netopia CLI 874 manual Will be rejected as a syntax error

2-54 Command Line Interface Commands Reference

Note that setting the mode value to generic will not change any other WAN interface module parameter; thus, the following command:

interface sdsl 1 operation mode generic default

will be rejected as a syntax error.

interface sdsl id pvc vpi-value vci-value show interface sdsl id pvc

These commands allow you to set, change, or show the PVC VPI and VCI values associated with the SDSL WAN interface.

interface sdsl id region { annexa annexb } show interface sdsl id region

These commands allow you to specify or show the region setting for devices that support multiple (North Amer- ican/non-North American) regions.

Note: These commands apply only to cell-based SDSL (R7200) interfaces.

interface { sdsl isdn } id rfc1973 dlci { 16 .. 991 } show interface { sdsl isdn } id rfc1973 dlci

These commands allow you to set or show an RFC 1973 DLCI for the SDSL or ISDN WAN interface.

Note that the only WAN interface modules that currently support RFC 1973 are the U/ISDN (31xx) and Copper Mountain SDSL (71xx). Attempts to set or show RFC 1973 parameters on any other WAN interface module will return an error.

interface { sdsl isdn } id rfc1973 enable { yes no } no interface { sdsl isdn } id rfc1973 enable

show interface { sdsl isdn } id rfc1973 enable

These commands allow you to enable, disable, or show RFC 1973 (PPP) behavior on the SDSL or ISDN WAN interface.

interface { sdsl isdn } id rfc1973 lmi { none lmi ccitt ansi annexa annexd } no interface { sdsl isdn } id rfc1973 lmi

show interface { sdsl isdn } id rfc1973 lmi

These commands allow you to specify, disable, or show the RFC 1973 (PPP) Local Management Interface (LMI) type on the SDSL or ISDN WAN interface.

The keywords ccitt and annexa are synonyms, as are the keywords ansi and annexd.