Netopia CLI 874 manual Wireless MultiMedia WMM Configuration Commands

2-96 Command Line Interface Commands Reference

wireless first-ssid-wpaver [ all WPA-v1-only WPA-v2-only ] show wireless first-ssid-wpaver

wireless second-ssid-wpaver [ all WPA-v1-only WPA-v2-only ] show wireless second-ssid-wpaver

wireless third-ssid-wpaver [ all WPA-v1-only WPA-v2-only ] show wireless third-ssid-wpaver

wireless fourth-ssid-wpaver [ all WPA-v1-only WPA-v2-only ] show wireless fourth-ssid-wpaver

Note: WPA privacy version commands are supported beginning with Firmware Version 8.6.

These commands allow you to set or show the first, second, third, or fourth SSID's allowed WPA versions if WPA is selected as a privacy option for that SSID. The default is all.

wireless first-ssid-psk string wireless second-ssid-psk string wireless third-ssid-psk string wireless fourth-ssid-psk string

These commands allow you to enter a WPA preshared key string for the specified SSID, if wireless privacy is set to wpa-pskfor that SSID.

Wireless MultiMedia (WMM) Configuration Commands

Note: These commands are supported beginning with Firmware Version 8.7.

Wireless MultiMedia (WMM) Configuration Commands

wireless wmm { off diffserv } show wireless wmm

wireless wmm { off diffserv } show wireless wmm

These commands allow you to set or show the status of the wireless multimedia option. Wireless Multimedia currently implements wireless Quality of Service (QoS) by transmitting data depending on diffserv priority settings.