Netopia CLI 874 manual Radius Authentication Profile configuration commands

Motorola Netopia® Router CLI Commands 2-39

RADIUS Authentication Profile configuration commands

Note: The commands in this section are supported beginning with Firmware Version 8.4.2.

Authentication Profile Configuration Commands

authprofile id [ yes no ] authprofile id tag string authprofile id remote server string authprofile id remote secret string authprofile id alternate server string authprofile id alternate secret string authprofile id radius identifier string

authprofile id radius port { 1 ...65535 }

show config authprofile id

authprofile id [ yes no ]

This command allows you to create or delete an authentication profile identified by id containing relevant information to access a RADIUS server. You associate the profile with a VLAN using the vlan 8021x authprofile command (page 37).

authprofile id tag string

This command allows you to name an authentication profile identified by id with a free-form name of up to 32 characters.

authprofile id remote server string

This command allows you to specify the RADIUS server’s IP address or fully qualified server name.

authprofile id remote secret string

This command allows you to specify the RADIUS server CHAP secret.

authprofile id alternate server string

This command allows you to specify an alternate RADIUS server, if available.