Netopia CLI 874 manual Sdsl WAN Interface configuration commands

Motorola Netopia® Router CLI Commands 2-51

SDSL WAN Interface configuration commands

SDSL WAN Interface Configuration Commands

interface sdsl id clock source { internal network } show interface sdsl id clock source

interface sdsl id clock rate rate-specificationshow interface sdsl id clock rate

interface sdsl id operation mode { generic lucent nokia-eoc-fast nokia-fixed paradyne nortel newbridge } [ default ]

show interface sdsl id operation mode

interface sdsl id pvc vpi-value vci-value show interface sdsl id pvc

interface sdsl id region { annexa annexb } show interface sdsl id region

interface { sdsl isdn } id rfc1973 dlci { 16 .. 991 } show interface { sdsl isdn } id rfc1973 dlci

interface { sdsl isdn } id rfc1973 enable { yes no } no interface ethernet { sdsl isdn } id rfc1973 enable show interface { sdsl isdn } id rfc1973 enable

interface { sdsl isdn } id rfc1973 lmi { none lmi ccitt ansi annexa annexd } no interface { sdsl isdn } id rfc1973 lmi

show interface { sdsl isdn } id rfc1973 lmi

show interface sdsl id status

interface sdsl id clock source { internal network } show interface sdsl id clock source

These commands allow you to set, change, or show the clock source associated with the SDSL WAN interface.

Note: These commands apply only to frame-based SDSL (R7100) interfaces.