Netopia CLI 874 Scheduled Connections Configuration Commands, ARP and Bridge timeout settings

2-98 Command Line Interface Commands Reference

ARP and Bridge timeout settings

Note: These commands are supported beginning with Firmware Version 8.4.2.

ARP and Bridge Timeout Settings

ip arp-timeout timeout

system bridge-timeout timeout

ip arp-timeout timeout

This command allows you to set the timeout value for ARP timeout. Default = 600 secs (10 mins); range = 60 secs - 6000 secs (1–100 mins).

system bridge-timeout timeout

This command allows you to set the timeout value for bridging table timeout. Default = 30 secs; range = 30 secs – 6000 secs (1–100 mins).

Scheduled Connections Configuration Commands

Note: Commands in this section are supported beginning with Firmware Version 8.3.1.