Motorola Netopia® Router CLI Commands 2-63
T1 WAN Interface Configuration Commands (continued)
interface t1 id rfc1973 dlci { 16..991 } show interface t1 id rfc1973 dlci
interface t1 id rfc1973 lmi { annexa annexd ansi ccitt lmi none } show interface t1 id rfc1973 lmi
no interface t1 id rfc1973 lmi
interface t1 id buildout { auto
These commands set or display the line buildout for the specified T1 WAN interface.
interface t1 id channels count integer
[ start integer ]
[ { alternating contiguous } ]
[ rate { 56 64 56k 64k Nx56k Nx64k } ] show interface t1 id channels
These commands set or display which DS0 channels are utilized on the specified T1 WAN interface, and the rate of those DS0 channels. The count clause is always required. The start clause is required unless the count clause specifies 24 channels, in which case if the start clause is not present, the starting channel number is assumed to be channel 1. If neither the alternating nor the contiguous keyword is specified, the contiguous keyword is assumed unless the line encoding is AMI and the count clause specifies two or more channels, in which case the alternating keyword is assumed. The rate clause is always optional. If the rate clause is not present, the value Nx64k is assumed, unless the line encoding is AMI, the count clause specifies two or more channels, and the contiguous keyword is specified, in which case the value Nx56k is assumed.
interface t1 id clock source { internal network } show interface t1 id clock source
These commands set or display the clock source for the specified T1 WAN interface.
interface t1 id dle { ppp hdlc rfc1490 } show interface t1 id dle
These commands set or display the data link encapsulation (DLE) for the specified T1 WAN interface.
Note:
interface t1 id
no interface t1 id
These commands allow you to set, show, or disable DS0 channel
