Netopia CLI 874 - page 190

5-8 Command Line Interface Commands Reference

; error -147: too many tokens

This error indicates that you entered more items than are allowed as part of the command. This could result

from failing to quote a string value that contains one or more spaces.

Example:

#cp 1 telco dn 555 1212

; error -147: unexpected text following command

#cp 1 telco dn "555 1212"

#sh cp 1 telco dn

cp 1 telco dn "555 1212"

; error -148: text too short

This error indicates that you supplied a string value that is shorter than the minimum permissible length for a

string item.

; error -149: no such subnet

This error indicates that you speciﬁed (or implicitly referenced) an unknown subnet.

Example:

#show interface ethernet 0 ip address

interface ethernet 0 ip address 192.168.1.1/24

#interface ethernet 0 address-serve range 192.168.1.128 192.168.1.159

#interface ethernet 0 address-serve gateway 192.168.2.1

; error -149: no such subnet

; error -150 not allowed for this particular item

This error indicates that you attempted an operation that might succeed on a different item in the same array

but isn't valid for the speciﬁed item.

; error -151 no item matching name exists

This error indicates that you speciﬁed an item when no item with that name exists.

; error -152 hex digits only, 0-9 or a-f or A-F

This error indicates that you entered a string for an item that permits only hexadecimal entries, i.e. 0–9 or a–f

or A–F.