Motorola Netopia® Router CLI Commands 2-121
index: 1 = primary server; 2 = alternate server
host: IP address or DNS hostname of server
secret: RADIUS or TACACS+ shared secret
tacacs-plus accounting [ yes no ]
This command enables or disables TACACS+ accounting.
IP Filterset Configuration Commands
Note: Beginning with firmware version 8.2, the force-routeand force-route-gatewayattributes have been added for policy-based routing, and the tos and tos-maskattibutes have been added for TOS field matching.
IP Filterset Configuration Commands
ip filterset fs-tag{in out} [filter] filter-id[enable {yes no}]
[forward {yes no} [ force-route {yes no ] force-route-gateway ip-addr}]] [{ call-placement idle-reset } { no-change disabled }]
[source { ip-addr/mask-bits ip-addr mask }]
[destination { ip-addr/mask-bits ip-addr mask }] [ tos { tos_value tos-masktos_mask_value }
[ protocol { 1..65535 any
gre
{{tcp 6 } [{source port-compare}] [{destination port-compare}] [established all] }
{{udp 17 } [{source port-compare}] [{destination port-compare}]}
{{icmp 1 } [{type port-compare}] [{code port-compare}]} } ]
no ip filterset fs-id[{in out} [filter-id]] show ip filterset fs-id[{in out} [filter-id]]
The CLI for filters is fairly complex. More explanation follows the command itself. compare-op= { nc ne <> lt < le <= eq = ge >= gt > }
port-compare = { nc { compare-op digits } }
filter-id = { 1..255 new last }
