Netopia CLI 874 manual Motorola Netopia Router CLI Commands

Motorola Netopia® Router CLI Commands 2-125

Global IPSec Configuration Commands

ike phase1 { name index } independent rekeys { yes no } show ike phase1 { name index } independent rekeys

no ike phase1 { name index } independent rekeys

ike phase1 { name index } initial-contact { yes no } show ike phase1 { name index } initial-contact

no ike phase1 { name index } initial-contact

ike phase1 { name index } negotiation { normal initiate-only respond-only } show ike phase1 { name index } negotiation

ike phase1 { name index } pfs { yes no } show ike phase1 { name index } pfs

no ike phase1 { name index } pfs

ike phase1 { name index } port policy { "strict" "permissive" } show ike phase1 { name index } port policy

ike phase1 { name index } sa lifetime { seconds kbytes } { non-negative-integernone } show ike phase1 { name index } sa lifetime [ { seconds kbytes } ]

no ike phase1 { name index } sa lifetime [ { seconds kbytes } ]

ike phase1 { name index } sa use-policy { new-sas-immediately old-sas-until-expired } show ike phase1 { name index } sa use-policy

ike phase1 { name index } vendor-id { yes no } show ike phase1 { name index } vendor-id

no ike phase1 { name index } vendor-id

ike phase1 { name index } [ { yes no } ] no ike phase1 { name index }

show ike phase1 { name index }

These commands create, delete, or show the specified IKE Phase1 profile, which may be identified by index or by name. The show version of this command displays the value yes if the specified IKE Phase 1 Profile exists, and no otherwise.

show ike phase1 { name index } id

This command displays the index of the specified IKE Phase1 profile. This command is useful only when referring to a profile by name.