Netopia CLI 874 manual Command Line Interface Commands Reference

2-42 Command Line Interface Commands Reference

interface ethernet 0 address-serve netbios scope name domain-nameshow interface ethernet 0 address-serve netbios scope name

These commands allow you to set or show the domain name under which the NetBIOS scope is enabled.

interface ethernet 0 address-serve netbios name-server enable { yes no } no interface ethernet 0 address-serve netbios name-server enable

show interface ethernet 0 address-serve netbios name-server enable

These commands allow you to set, delete, or show whether a NetBIOS name server address is served to NetBIOS clients.

interface ethernet 0 address-serve netbios name-server address xxx.xxx.xxx.xxx [secondary] show interface ethernet 0 address-serve netbios name-server address

These commands allow you to set or show the IP address of the NetBIOS name server.

If the keyword secondary is specified and there is no primary WINS server the command will be rejected as CLI_NO_CFG_SUPPORT_ERR, with the error message "; error 2: not supported with current configuration“.