Netopia CLI 874 manual Priority Queuing TOS bit Commands

Motorola Netopia® Router CLI Commands 2-55

show interface sdsl id status

This command allows you to display the status of the specified SDSL interface. For a cell-based SDSL (R7200) interface, the possible status strings and their meanings are:

Status String	Meaning
Connected at xxx Kbps	The interface is connected to the DSLAM at the specified
	speed.
Trying xxx Kbps	The SDSL interface is attempting to connect to the DSLAM at
	the specified speed.
Activation Backoff	The SDSL interface is between connection attempts.
Down	The SDSL interface is not yet initialized.
No signal from DSLAM	The SDSL interface is not detecting a signal from a DSLAM.

Priority Queuing (TOS bit) Commands

Priority Queuing Configuration Commands

interface { adsl sdsl t1 serial } id priority-queuing enable { yes no } no interface { adsl sdsl t1 serial } id priority-queuing enable

show interface { adsl sdsl t1 serial } id priority-queuing enable

interface { adsl sdsl t1 serial } id priority-queuing enable { yes no } no interface { adsl sdsl t1 serial } id priority-queuing enable

show interface { adsl sdsl t1 serial } id priority-queuing enable

These commands allow you to enable, disable, or show the priority queuing (TOS) setting for the specified WAN interface.