Netopia CLI 874 manual Motorola Netopia Router CLI Commands

Motorola Netopia® Router CLI Commands 2-75

ip ntp period value no ip ntp period show ip ntp period

Note: These commands are supported beginning with Firmware Version 8.3.3.

These commands allow you to set, disable, or display the setting of a Network Time Protocol (NTP) server’s NTP Update Interval for the router. The value should be entered in HHHH:MM format.

ip ntp servers ip-addr1 ip-addr2 no ip ntp servers

show ip ntp servers

Note: These commands are supported beginning with Firmware Version 8.3.3.

These commands allow you to set, disable, or display the Host Name or IP Address of a Network Time Protocol (NTP) server you want to specify for the router. You can also specify an alternate NTP server Host Name or IP Address, separated by a space.

ip ntp timezone value no ip ntp timezone show ip ntp timezone

Note: These commands are supported beginning with Firmware Version 8.3.3.

These commands allow you to set, disable, or display your time zone. You can specify the time zone as + or - Greenwich Mean Time (GMT), or as the standard abbreviation of your zone, if it has one.

For example: GMT -8:00 Pacific Standard Time can be entered as pst. The following table shows some standard time settings.

GMT -10:00 Hawaii Standard Time	GMT +3:30 Tehran
GMT -9:00 Alaska Standard Time	GMT +4:00 Russia Zone 3
GMT -8:00 Pacific Standard Time	GMT +4:30 Kabul
GMT -7:00 Mountain Standard Time	GMT +5:00 Russia Zone 4
GMT -6:00 Central Standard Time	GMT +5:30 India
GMT -5:00 Eastern Standard Time	GMT +6:00 Russia Zone 5
GMT -4:00 Atlantic Standard Time	GMT +7:00 Russia Zone 6
GMT -3:30 Newfoundland	GMT +8:00 W. Australia Std.
	Time
GMT -2:00 Mid-Atlantic Time	GMT +9:00 Japan Standard Time
GMT -1:00 Azores Time	GMT +9:30 Adelaide, Darwin
GMT +0:00 Greenwich Mean Time	GMT +10:00 E. Aust. Std. Time