Netopia CLI 874 manual Motorola Netopia Router CLI Commands

Motorola Netopia® Router CLI Commands 2-127

ike phase1 { name index } authentication shared-secret { ascii hexadecimal } string

This command sets the specified IKE Phase1 profile’s shared secret. For security reasons no show variant of this command exists.

ike phase1 { name index } dangling-sas { yes no } show ike phase1 { name index } dangling-sas

no ike phase1 { name index } dangling-sas

These commands set, display, or disable whether or not Phase 2 SAs may persist after the underlying Phase 1 SAs have expired.

ike phase1 { name index } encryption { des 3des } show ike phase1 { name index } encryption

These commands set or display the specified IKE Phase1 profile’s encryption algorithm.

ike phase1 { name index } group { 1 2 5 dh-768-bits dh-1024-bits dh-1536-bits } show ike phase1 { name index } group

These commands set or display the specified IKE Phase1 profile’s Diffie-Hellman group.

Note: 1 and dh-768-bits, 2 and dh-1024-bits, and 5 and dh-1536-bits, respectively, are synonyms.

ike phase1 { name index } hash { sha1 md5 } show ike phase1 { name index } hash

These commands set or display the specified IKE Phase1 profile’s hash algorithm.

show ike status

Note: This command is supported beginning with firmware version 8.5.

This command allows you to view an IKE session setup.

show ipsec sessions

Note: This command is supported beginning with firmware version 8.5.

This command allows you to view an IPsec session setup.

ike phase1 { name index } independent rekeys { yes no } show ike phase1 { name index } independent rekeys

no ike phase1 { name index } independent rekeys

These commands set or display the specified IKE Phase1 profile’s independent phase 2 re-keys setting.