Netopia CLI 874 manual T1 Statistic and Diagnostic commands, Example

Motorola Netopia® Router CLI Commands 2-65

T1 Statistic and Diagnostic commands

T1 Statistic and Diagnostic Commands

show interface t1 id errors { current interval 1..96 total }

interface t1 id diagnostic mode { local loopback normal remote loopback send { all ones blue alarm loopback } }

show interface t1 id diagnostic mode show interface t1 id line status show interface t1 id loopback mode show interface t1 id loopback status

show interface t1 id errors { current interval 1..96 total }

This command displays the error statistics for the specified T1 WAN interface for a particular 15-minute interval during the previous 24-hour period, or the total for the past 24 hours. Specifying the keyword current displays the error statistics for the current 15-minute interval. Specifying the keyword interval followed by an integer between 1 and 96 displays the error statistics for a prior 15-minute interval. Interval 1 is the most recently completed 15-minute interval, while interval 96 is the interval completed 23 hours and 45 minutes prior to interval 1. Specifying the keyword total displays the total error statistics for the last 24 hours.

Example:

#show interface t1 1 errors interval 1

15 minutes ending 16:32:44
Errored Seconds	001
Unavailable Seconds	000
Severely Errored Seconds	001
Bursty Errored Seconds	001
Loss of Frame Count	000
Bipolar Violation Count	001

#show interface t1 1 errors total

24 hours ending 16:32:44
Errored Seconds	001
Unavailable Seconds	000
Severely Errored Seconds	001
Bursty Errored Seconds	001
Loss of Frame Count	000