2-108 Command Line Interface Commands Reference

show version [ cli ] [ firmware ] [ hardware ] [ mib ] [ wan 1 ] [ wan 2 ]

This command allows you to display some or all of the router's version strings. If you don't specify anything after the keyword version, the router displays a list of all of the version strings; otherwise it displays the specified version string.

The R-Series WAN interface module firmware version is displayed for the specified WAN module, wan 1 or wan 2. wan1 is an acceptable substitute for wan 1; wan2 is an acceptable substitute for wan 2.

The CLI, hardware, and product-specific SNMP MIB version strings consist of a major version, minor version, release stage, and revision, displayed in the (decimal) form “MM.mmsrr”, where:

‘MM’ is the major version,

‘mm’ is the minor version,

‘s’ is the release stage -– e (experimental), d (development), a (alpha), b (beta), or f (final),

‘rr’ is the revision.

The firmware version string consists of a major version, minor version, point release version, release stage, and revision, displayed in the (decimal) form “MM.mm.ppsrr”, where:

‘MM’ is the major version,

‘mm’ is the minor version,

‘pp’ is the point release version,

‘s’ is the release stage – d (development), a (alpha), b (beta), fc (final candidate), or f (final),

‘rr’ is the revision.

Examples:

 

 

#show version

 

cli

version:

01.00d00

firmware version:

04.10.00

hardware

version:

01.00f00

mib

version:

01.00f00

wan1

version:

fw v1.0.6

wan1

version:

V2.210-N-V90_2M_DLS

#

 

 

system restart-delay [ time (minutes) no ] show system restart-delay

Note: These commands are supported beginning with firmware version 8.5.

The system restart-delaycommand schedules a system reset for a specified number of minutes from now. The show command displays how many minutes are left before a reset will take place. The no modifier, or setting the time to zero, cancels the scheduled reset.

Page 120
Image 120
Netopia CLI 874 manual Examples