Netopia CLI 874 manual Command Line Interface Commands Reference

2-52 Command Line Interface Commands Reference

interface sdsl id clock rate rate-specificationshow interface sdsl id clock rate

These commands allow you to set, change, or show the data rate associated with the SDSL WAN interface.

Note: The permissible values for rate-specificationdepend on the type of SDSL WAN interface. For frame-based SDSL (R7100) interfaces, rate-specificationmay be replaced with:

{160 208 320 416 784 1040 1568 }

For cell-based SDSL (R7200) interfaces, rate-specificationmay be replaced with:

{144...2320 } [{ hunt locked }]

See the table on the next page for possible rate specifications.

Also, data rate is accepted as a synonym for clock rate.