Appendix B: Redirection Server

June 30, 2006

USING NO EDS-URL-IDENTITY COMMAND

The no eds-url-identity command deletes the eds name configuration to be used in the EDS URL. The system uses its default value (system primary IP address).

The command is located in the “configure terminal” menu.

Usage

no eds-url-identity

Example 1:

RDSHost(config)> no eds-url-identityredirect_test RDSHost> write terminal <cr>

...

IP-IN-IP COMMANDS

Using remote-ip-in-ip command

The remote-ip-in-ip command defines the remote endpoints in which the system should return the traffic through an ip-in-ip tunnel.

The command is located in the “configure terminal” menu.

The maximum number of remote ip-in-ip endpoints is 32.

When the remote-ip-in-ip is not defined, the system returns the traffic to the users without ip-in-ip encapsulation (as done today).

Usage

remote-ip-in-ip <IP address>

Parameter <IP address>

It is the remote ip-in-ip endpoint IP address.

B-22

SG1-UM-8500-03

Page 216
Image 216
ADC SG-1 user manual No eds-url-identity, Using remote-ip-in-ip command, Remote-ip-in-ip IP address