ADC SG-1 user manual QOS Group, Gcon-avpair = qosup-mean-rate=up mean rate in Kbits

June 30, 2006 Appendix A: SG-1Vendor-Specific Attributes

QOS GROUP

qos:up-mean-rate

The qos:up-mean-rate sub-attribute specifies the average number of bits per second allowed by the user in the upstream direction. It is sent in an Access-Accept message and it overwrites the current upstream rate allocated to the user. This attribute may be activated during a session lifetime.

General:

Operation Mode:	Access-Accept message
	Service-Accept message
Vendor-type:	90
Vendor-length =	2 + name length + (1-128)

Format:

gcon-avpair = "qos:up-mean-rate=<up mean rate in Kbits>",

Example:

gcon-avpair = "qos:up-mean-rate=128",

qos:down-mean-rate

The qos:up-mean-rate sub-attribute specifies the average number of bits per second allowed by the user in the downstream direction. It is sent in an Access-Accept message and it overwrites the current downstream rate allocated to the user. This attribute may be activated during a session lifetime.

General:

Operation Mode:	Access-Accept message
	Service-Accept message
Vendor-type:	91
Vendor-length =	2 + name length + (1-64)

Format:

gcon-avpair = "qos:down-mean-rate=<down mean rate in Kbits>",

Example:

gcon-avpair = "qos:down-mean-rate=256",

qos:acl-up-mean-rate sub attribute

The qos:acl-up-mean-rate sub-attribute specifies the average number of bits per second allowed to the user in the upstream direction per a specified access list. It is sent in Access-Accept message and it overwrites the current access list upstream rate of the user. This attribute may be operated during the session lifetime (EDS).

SG1-UM-8500-03 A-33