ADC SG-1 Using the show version command, Host show version, Show version softwarehardwarepack

Chapter 6: First-Level Commands June 30, 2006

These commands are discussed below.

Using the show version command

Host> show version

Enter show version to see version levels of hardware and software.

Usage

show version <softwarehardwarepack>

show version software <SCC>

show version hardware <2>

Parameter(s)

<softwarehardwarepack>

The first-level parameter has three options:

•software–Displays the software version of the SCC in question.

•hardware–Displays hardware information of the SCC in question.

•pack–Displays detailed information of the installed software version.

<SCC>

The software version for the Service Creation Card in question.

<2>

Module number.

6-4 SG1-UM-8500-03