Chapter 4: Accessing the Command Line Interface

June 30, 2006

DISPLAYING THE IP ADDRESS

Host> show configuration

From the Host> prompt, enter the show configuration command to verify your configuration.

Example(s)

Host> show configuration

interface ethernet 0\1 192.168.0.1 255.255.255.0 mode auto ip default-gateway 192.168.0.253

When the show configuration command is entered, A screen similar to the one above displays the SG-1 SCC card’s Ethernet port IP address, subnet mask, and default gateway (if applicable).

4-4

SG1-UM-8500-03

Page 34
Image 34
ADC SG-1 user manual Displaying the IP Address, Host show configuration