ADC SG-1 user manual Adc-avpair = useraction=Reject, User SSC-host sub-attribute

Appendix A: SG-1Vendor-Specific Attributes June 30, 2006

General:

Operation Mode:	Access-Accept message
	Service-Accept message
Vendor-type:	14
Vendor-length =	2 + 11 + (4-12)

Format:

adc-avpair = "user:action=<Reject echo macantispoof user_space_overwrite user_space_overwrite_on_next_service >">",

Example:

adc-avpair = "user:action=Reject",

user: SSC-host sub-attribute

This vendor-specific sub-attribute contains the SSC (Service Selection Center) host IP address at which the user activated the service. By sending this information, the system gives the RADIUS a hint as to the SSC IP address. This is used for authorization purposes. This sub-attribute is used only in service authentication requests.

General:

Operation Mode:	Access-Request message
	Service-Request message
Vendor-type:	15
Vendor-length =	2 + name length + 7-15

Format:

adc-avpair = "user:SSC-host=<SSC host IP address>,

Example:

adc-avpair = "user:SSC-host=194.90.1.15",

user: service-name sub-attribute

This vendor-specific sub-attribute contains the service name given to the connected peer. The user:service-name sub-attribute represents the service of the currently received attributes. It is a hint given by the RADIUS. When sent by the POPmaestro in an access-request message it implies the service requested by the user.

A-10 SG1-UM-8500-03