ADC SG-1 user manual Hostconfig# ip primary-name-server, Ip primary-name-server IP address

June 30, 2006 Chapter 7: Second Level Commands

Configuring the primary DNS

Host(config)# ip primary-name-server

Usage

ip primary-name-server <IP address>

Example(s)

Host(config)# ip primary-name-server 55.12.1.24

Configuring the secondary DNS

Host(config)# ip secondary-name-server

Usage

ip secondary-name-server <IP address>

Example(s)

Host(config)# ip secondary-name-server 55.12.1.24

Setting tunnel servers

Host(config)# tunnel-server

Each IAS (Internet Access Switch) which will send its users to the SG-1 must be configured in the SG-1 (or several IAS which are in the same Mask and use the same tunnel password). The tunnel-server host command is used to configure the tunnel server (IAS) settings.

Usage

tunnel-server host <IP address> mask <mask> [password <alpha-numeric string>]

After keying in the above string, the tunnel password is encrypted.

Parameter(s)

<IP address>

The LAC machine IP address.

SG1-UM-8500-03 7-41