Chapter 6: First-Level Commands

June 30, 2006

Displaying show mpls-labels commands

Host> show mpls-labels

It displays the incoming labels binding received from the neighbors and the out-going label binding distributed by the system. When no specific FEC is defined, the system shows all FECs.

Usage

Show mpls-labels <standard vc> <out in> [<FEC identifier>]

Parameter(s)

<standard vc>

Standard labels are the first labels on the stack, while vc labels (tunnels) are the second lable on the stack.

<out in>

Lables that are out-going or incoming.

<FEC identifier>

It is the FEC (Forward Equivalence Class) identifier.

Note: The system default value is 0 (which means all FECs).

Example(s)

Standard in:

Host>

show labels standard in

 

 

 

FEC ID

IP destination FEC

Label

Next-Hop

Interface

1

192.168.1.0/24

123876

10.0.1.8

Ethernet 1

2

212.8.1.0/24

1034

10.0.1.3

Ethernet 1

 

 

 

 

Standard out:

 

 

 

 

 

 

 

 

Host>

show labels standard out

 

 

 

FEC ID

IP destination FEC

Label

 

 

1

192.168.1.0/24

123876

 

 

2

212.8.1.0/24

1034

 

 

 

 

 

 

 

6-24

SG1-UM-8500-03

Page 60
Image 60
ADC SG-1 user manual Displaying show mpls-labels commands, Host show mpls-labels