Chapter 6: First-Level Commands

June 30, 2006

Using the copy-TFTP command

Host> copy-TFTP flash

Use this command to copy a new application software (image) or license file from a TFTP server to the flash memory of the SCC-ETH card.

Usage

copy-TFTP flash [<IP address> <license>] <ip address> <file name>

Note: The SG-1 as a service creation machine uses a license mechanism, which enables the activation and deactivation of specific services. Use the [license] parameter to upgrade the current version of the license file running on the SCC.

Parameter(s)

<ip address>

This is the IP address of the TFTP server to be used for the software or license upgrade.

<license>

This parameter will allow the upgrading of a license file on the SCC.

<file name>

This is the file name used for the software or license upgrade (the file name is 1 to 64 alphanumeric characters).

Example(s)

Host> copy-TFTP flash 192.168.0.1 V10_PM Download in progress

99%

Closing the download process. Pack loaded successfully.

In order to use new software, please reload the system

Host>

Host> copy-TFTP flash license 192.168.1.2 lic101.txt

Using the ping command to test network connectivity

Use the Ping command to elicit an ICMP ECHO_RESPONSE from a host or gateway. This command can be used to send a PING via an ATM or IP interface.

Usage

ping <ip address> [-c <number> -i <number> -s <number>] [atm <atm slot number> <atm sub-interface number> <atm vpi number> <atm vci number> (end-loopbackrepeat <number>)]

Parameter(s)

<ip address>

6-28

SG1-UM-8500-03

Page 64
Image 64
ADC SG-1 user manual Using the copy-TFTP command, Host copy-TFTP flash, Using the ping command to test network connectivity