ADC SG-1 user manual Using Reset Configuration Command, Http Commands, Reset configuration

June 30, 2006	Appendix B: Redirection Server
Parameter
<community string>
It is an Alpha community numeric string.
Example:
RDSHost(config)> SNMP-server community set test <cr>
RDSHost(config)> end
RDSHost> write terminal <cr>
...
SNMP-server community set test
...

USING RESET CONFIGURATION COMMAND

•The reset configuration command deletes the RDS stored configuration.

•It is located at the “ADC” menu.

Usage

reset configuration

HTTP COMMANDS

Using http-proxy-server port command

•The http-proxy-server port command defines the supported Http-proxy server posts in the system.

•The command is located in the “configure terminal” menu.

•The total available http-proxy-server ports are 3.

SG1-UM-8500-03 B-17