Chapter 7: Second Level Commands

June 30, 2006

Configuring a single PVC

Host(config)# atm pvc

This command creates a permanent virtual circuit (PVC) on an ATM interface.

Usage

atm pvc <vpi> <vci> <slot> <port> <sub-interface> [name <pvc name>] [ OAM <onoffon-cc> ubr <peak cell rate>]

Parameter(s)

<vpi>

The virtual path identifier (valid values 0 - 255).

<vci>

The virtual channel identifier (valid values 32 - 2032).

<slot>

The value 2 is required to select the SONET/SDH interface.

<port>

The port on which the circuit is to be created (valid values 1 and 2).

<sub-interface>

A logical interface number that can be used to group circuits (valid values 1 - 2000).

[name <name>]

A 1 to 64 character alpha-numeric identifier that can be assigned to a circuit for tracking purposes.

7-20

SG1-UM-8500-03

Page 100
Image 100
ADC SG-1 user manual Configuring a single PVC, Hostconfig# atm pvc, Vpi, Vci, Name name