ADC SG-1 user manual Authentication Commands, Hostconfig# no interface vlan

June 30, 2006 Chapter 7: Second Level Commands

Using no interface VLAN command

Host(config)# no interface vlan

This command deletes a VLAN definition for the Ethernet interface.

Usage

no interface vlan <slot number> \ <port number> < id>

Parameter(s)

<slot number>

This is the slot number of the physical card.

<port number>

This is the port number of the card (1 or 2).

<id>

This is the VLAN interface identifier; valid number range is 1 to 4095.

Example(s)

Host(config)# no vlan 3 1\1

AUTHENTICATION COMMANDS

Using the password pre-authentication command

Host(config)# password pre-authentication

This command defines the system pre-authentication password.

Usage

password pre-authentication <password>

For <password> options, see Table 4-1, “Default Username/Password,” on page 4-1.

SG1-UM-8500-03 7-11