SONOS PLAYBAR | 11 |
Using the Sonos Controller for Mac or PC
1.Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
2.Select Room Settings if it is not already highlighted on the left.
3.Choose the room the PLAYBAR is located in from the Room Settings for
4.Select the TV Setup tab.
5.Click Remote Control Setup.
6.Pick up the remote control you wish to begin using with the PLAYBAR, and then click Next.
7.Point the remote at the PLAYBAR and press the Volume Up button on the remote control.
•If the remote control is recognized, click Done. You can now use that remote to control the volume and mute settings on your PLAYBAR.
•If the remote control is not recognized, you will be prompted to make additional button presses to complete the setup process.
If a message appears on the television whenever you adjust the volume up and down, please see "Eliminating annoying messages on your TV when using a cable, satellite, or set top box remote" on page 24 or "Eliminating annoying messages on your TV when using a universal remote" on page 26.
Equalization (EQ)
During the PLAYBAR setup process you were guided through the audio calibration process. If desired, you can change the sound settings (bass, treble or loudness) for the SONOS PLAYBAR. Bass boosts lower frequencies, treble boosts higher frequencies, while loudness boosts certain frequencies, including bass, to improve the sound at low volume.
Any manual EQ changes you make will be reset whenever you go through the audio recalibration process (see page 12 for more information).
Using a handheld Sonos controller
1.From the Settings menu, select Room Settings.
2.Select the room you want to adjust.
3.Select Equalization.
4.Choose one of the following options:
•Drag your finger across the bass or treble sliders to make adjustments.
•Select On or Off to adjust the Loudness setting.
Using the Sonos Controller for Mac or PC
1.Select Manage
2.Select Room Settings if it is not already highlighted on the left.
3.Choose the room the PLAYBAR is located in from the Room Settings for list, and then select the EQ tab.
4.Choose one of the following options:
•Click and drag the bass or treble sliders to make adjustments.
•Click the Loudness checkbox to turn the loudness setting on or off.
5.Close the Settings window when changes are complete.
