Elmo HV-C1000XG Connection, Transmission Specifications, Data Format Specifications

1

2

3

Connection

If the RS-232C cable is not correctly connected between this product and the PC, no acknowledgement is transmitted. Connect the RS-232C cable correctly, and fix it firmly with the connector set screws before the operation.

Transmission Specifications

	• Full duplex start-stop sync. mode
	• Start bit	: 1 bit
4	• Data bit	: 8 bits
	• Stop bit	: 1 bit
	• Parity bit	: None
	• X parameter	: None
5	• Baud rate (Communication speed)	: 9600bps

Data Format Specifications

6

This command is executed in the form of 1-command/1 packet. The next command is not accepted until the previous processing is completed.

•The communication command always starts with STX (Start of Text) , and ends with ETX

7 (End of Text) .

•If the communication format or command name is wrong, NAK (Negative Acknowledgement) will be sent from this product.

•When the communication format is correctly received, this product sends ACK (Normal

8 Acknowledgement).

■Transmission command (PC → Ceiling Presenter)

Each operation command is executed in ASCII code, and transmitted in a set of 7 bytes as

9 follows:

	S				E
		Command	Parameter	Data
(PC)	T				T
10	X				X
(Ceiling Presenter)	→ ACK
11

33