5 OPERATION PROCEDURES
Simple Steps for Presenting Printed Material
1
(1)Push the [POWER] button of the wireless remote control to turn ON the power (Indicator LED on the unit turns from red to green).
Connection with the monitor should be done in advance.
If the Power Supply Switch is turned ON immediately after it is turned OFF, this product may not operate.
To restart operation, turn ON the Power Supply Switch after several seconds.
When the document surface is dark, turn ON the lamp by pressing the [LAMP] button.
After the power supply is turned ON, it takes about 10 seconds to execute the initialization of the unit and output the image.
(2)Place an object on the document surface and adjust the image size using [ZOOM·TELE] and [ZOOM·WIDE] buttons on the wireless remote control as you watch the monitor screen so that the projected image may be in compliance with the object.
Wireless remote control
(1) | POWER |
|
|
|
|
|
| PAUSE |
|
|
|
|
|
(4) |
|
|
|
|
|
|
| SET PRESET CALL | SET IMAGE CALL |
| |||
| POSI/NEGA | COLOR/B&W CONTRAST | LAMP |
| ||
(2) | MENU |
|
| IMAGE ROTATION F.A.M. |
| |
TELE | ZOOM WIDE | NEAR FOCUS FAR | (3) | |||
| NORMAL | OPEN | CLOSE | AF | ||
|
|
| IRIS |
|
|
|
Wireless remote control
TELE ZOOM WIDE NEAR FOCUS FAR
CLOSE AF
2
3
4
5
6
7
(3)Adjust the focus by pressing the [FOCUS·N/F] (NEAR/FAR) buttons of the wireless remote control. The focus can be also adjusted by pressing the [AF] (AUTO FOCUS) button.
(4)After finishing the operation, turn OFF the [POWER] button of the wireless remote control. (Indicator LED on the unit turns from green to red.)
Wireless remote control
TELE ZOOM WIDE | NEAR FOCUS FAR |
NORMAL OPEN
IRIS
8
9
10
11
16
