Image Memory

Images can be stored / called in the memory of this product (max. 8 images).

1.Press the [IMAGE.SET] button on the wireless remote control and press the MEMORY NO. button of the wireless remote control within 4 sec then the image is stored in the pressed number.

When the Power Supply is turned OFF by pressing the [ P O W E R ] button of the wireless remote control, the images stored in the memory are deleted.

2.How to read out stored images

Press the [IMAGE.CALL] button on the wireless remote control and press the MEMORY NO. button of the wireless remote control within 4 sec then the image in the memory corresponding to the pressed number is read out.

Wireless remote control

POWER

PAUSE

SET PRESET CALL

SET IMAGE CALL

POSI/NEGA COLOR/B&W CONTRAST LAMP

MENU

IMAGE ROTATION F.A.M.

TELE ZOOM WIDE

NEAR FOCUS FAR

NORMAL OPEN CLOSE AF

IRIS

Wireless remote control

SET PRESET CALL

SET IMAGE CALL

POSI/NEGA COLOR/B&W

Reference Page

1

2

3

4

5

To return to the normal camera image, press the

•OSD........ P.27

[IMAGE.CALL] button again “within 4 seconds”.

The image cannot be saved in the number from

 

which the image is read.

 

"Utility Software CD-ROM"

The attached "Utility Software CD-ROM" contains the PC link software "Image Mate" and the TWAIN driver "ELMO TWAIN DS, "and can be operated as shown below.

To transfer graphic data to PC.

To operate this product by PC.

For details, see the Installation Manual for "Utility Software" and "manual.pdf" in the CD- ROM.

6

7

8

9

10

11

26

Page 27
Image 27
Elmo HV-C1000XG instruction manual Image Memory, Utility Software CD-ROM, How to read out stored images