1
2
3
Connection to Monitor and Projector
The following settings of this product can be made with the DIP Switches. Make the settings according to the connection environment. The factory settings are as shown in the following table:
|
| Initial setting | |
Key | Function | Key selection | Content |
A | To change the Video output type | 1 | NTSC |
B | To change the screen size of Video output | 0 | Over scan |
Be sure to turn OFF the power supply to all equipment before making any connections to protect this product and all the connected equipment.
4 | When changing the DIP Switch keys, be sure to turn OFF the power supply to this product | |
beforehand. | ||
5 | ■ Connection to the analog | |
Connect the Analog | ||
terminal with the analog RGB cable (attached) or a connection cable available on the market. | ||
| ||
| At this time, the position of the display may be deviated from the center. If deviated, manually | |
| adjust the horizontal and vertical positions on the connected equipment. | |
6 | Also, vertical stripes may appear on the screen of the LCD projector. That can be alleviated | |
by manually adjusting the dot clock frequency on the projector. |
LCD projector
7
8
9
10
11
RGB OUT | AC IN POWER | |
|
| CRT monitor |
MOUSE USB | VIDEO | or |
|
|
■Connection to the composite video-out terminal
Use the Composite
RGB OUT | AC IN POWER | TV monitor | |
MOUSE USB | VIDEO |
|
|
■Connection to the S video-out terminal
Use the S
RGB OUT | AC IN POWER | TV monitor | |
MOUSE USB | VIDEO |
|
|
Hold the cable plug when connecting or disconnecting the cables.
15
