Netopia CLI 874 manual Cp name index ip mask local ip-mask

Motorola Netopia® Router Connection Profile Commands 3-13

IP Gateway	DHCP server
DNS server 1	DNS server 2 (if any)
Lease Expiration

show cp { name index } ip dhcp client [ renew release ]

Note: This command is supported beginning with firmware version 8.5.

This command allows you to renew or release the ethernet WAN IP address lease being served via DHCP for the specified connection profile.

cp { name index } ip mask local ip-mask

This command allows you to set the profile’s local WAN IP mask.

cp { name index } ip mask remote ip-mask

This command allows you to set the profile’s remote WAN IP mask.

cp { name index } ip multicast-fwd { yes no } no cp { name index } ip multicast-fwd

show cp { name index } ip multicast-fwd

These commands allow you to set, show, or disable multicast forwarding on the specified connection profile.

cp { name index } ip negotiate-lan { yes no } no cp { name index } ip negotiate-lan

show cp { name index } ip negotiate-lan

These commands allow you to set, delete, or show whether the specified connection profile will attempt to negotiate the router hub’s IP address and subnet mask from the central site router.

The firmware includes PPP support for the IPCP Subnet Mask option documented in PPP Internet Protocol Control Protocol Extensions for IP Subnet, draft-helenius-ppp-subnet-00.txt. This option, together with the IPCP IP Address option, allows a central site router to supply an entire IP subnet, rather than a single IP address, for use by a CPE router.

PPPEthernet LAN reconfiguration is controlled by an ip negotiate-lanconnection profile flag. If the applicable connection profile specifies an unnumbered, non-NAT connection and the ip negotiate-lanflag is yes, PPP will attempt to negotiate both an IP Address and subnet mask.