Wireless Conﬁguration Commands

Note: The commands in this section are supported beginning with Firmware Version 8.2 on wireless (802.11)- enabled routers.

wireless enable [ yes no ] show wireless enable

wireless closed-system [ yes no ] show wireless closed-system

wireless ssid string show wireless ssid

wireless auto-channel [ off at-startup continuous ] no wireless auto-channel

show wireless auto-channel

wireless tx-power [ full medium fair low minimal ]

show wireless clients

show wireless statistics

wireless default-channel [ no 1..14 ] show wireless default-channel

wireless wep [ enable disable ] show wireless wep

wireless default-keyid [ 1..4 ] show wireless default-keyid

wireless wep encpt-key [ 1..4 ] hex_string no wireless wep encpt-key hex_string show wireless wep encpt-key [ 1..4 ]

Netopia CLI 874 manual Wireless Conﬁguration Commands