Netopia CLI 874 manual Serial port modem backup configuration commands

2-118 Command Line Interface Commands Reference

Serial port modem backup configuration commands

Serial Port Modem Backup Configuration Commands

interface serial id modem directory-number string no interface serial id modem directory-number

show interface serial id modem directory-number string

interface serial id modem baud string show interface serial id modem baud

interface serial id modem init-string string no interface serial id modem init-string show interface serial id modem init-string

interface serial id mode { console modem } show interface serial id mode

interface serial id modem directory-number string no interface serial id modem directory-number

show interface serial id modem directory-number string

These commands allow you to set, disable, or show the modem directory number for the specified serial interface. The string parameter can contain up to 15 characters. Non-dialable characters are allowed, but ignored.

Note: The 4000-Series data routers have one serial port, and its id is "0" (zero).

interface serial id modem baud string show interface serial id modem baud

These commands allow you to set or show the baud rate for the specified serial port. Permissible values for the string parameter are 9600, 19200, 38400, 57600, 115200.

interface serial id modem init-string string no interface serial id modem init-string show interface serial id modem init-string

These commands allow you to set, delete, or show the modem initialization string for the specified serial port. Consult your modem’s documentation or the AT command set for an appropriate initialization string. The string parameter can contain up to 31 characters.