Motorola Netopia® Router Connection Profile Commands 3-23
cp { name index } l2tp authentication passphrase string
This command sets the local (i.e. LAC/LNS) passphrase. The passphrase must be at least eight characters in length. This value is used to establish the shared secret key that must be present when a LAC/LNS pair wants to authenticate an L2TP tunnel.
cp { name index } l2tp authentication ppp type { pap chap } show cp { name index } l2tp authentication ppp
These commands allow you to specify an L2TP authentication type, PAP or CHAP, for a particular connection profile specified by name or index.
cp { name index } l2tp authentication ppp { send receive } name string show cp { name index } l2tp authentication ppp { send receive } name
These commands allow you to set or show the user name as an alphanumeric string that the specified connection profile will use for L2TP authentication.
cp { name index } l2tp authentication ppp { send receive } password string show cp { name index } l2tp authentication ppp { send receive } password
These commands allow you to set or show the password as an alphanumeric string that the specified connection profile will use for L2TP authentication.
cp { name index } l2tp compression { none standardlzs } no cp { name index } l2tp compression
show cp { name index } l2tp compression
These commands allow you to specify, disable, or show the PPP compression algorithm, if any. The current options are none (for no compression) and standardlzs for compression.
GRE Connection Profile Configuration Commands
Note: The commands in this section are supported beginning with Firmware Version 8.4.
cp { name index } gre ip partner
These commands allow you to specify or show the partner IPv4 address associated with the local GRE tunnel connection profile.
cp { name index } gre ip via
These commands allow you to specify or show the gateway (next hop forwarding) address used when routing GRE (tunneled) packets to the partner. when the partner IP and the remote IP addresses are on the same subnet.
