Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual Command Code 05, Force ON/OFF single contact, Pc→Plc

DVP - ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming

Field Name	ASCII
Data Hi (T26)	00
Data Lo (T26)	07
Data Hi (T27)	00
Data Lo (T27)	08
Error Check (LRC)	C8
END 1	0D (Hex)
END 0	0A (Hex)

4.5.4 Command Code: 05, Force ON/OFF single contact

The Force data FF00 (Hex) indicates force ON the contact. The Force data 0000 (Hex) indicates force OFF the contact. Also, When MMNN = 0xFF00, the coil will be ON, when MMNN = 0x0000, the coil will be OFF. Other force data is invalid and will not take any effect.

Example: Force coil Y0 ON

PC→PLC		“: 01 05 05 00 FF 00 F6 CR LF”
Sent message:
		Field Name	ASCII
	STX		:
	Slave Address		01
	Command code		05
	Coil Address Hi		05
	Coil Address Lo		00
	Force Data Hi		FF
	Force Data Lo		00
	Error Check (LRC)		F6
	END 1		0D (Hex)
	END 0		0A (Hex)
PLC→PC		“: 01 05 05 00 FF 00 F6 CR LF”
Feedback message:
		Field Name	ASCII
	STX		:
	Slave Address		01
	Command code		05
	Coil Address Hi		05
	Coil Address Lo		00
	Force Data Hi		FF
4 - 16