Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual OFF PCC01

DVP - ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming

Special		ES2	SS2	SA2	SX2	OFF	STOP	RUN	Attrib.	Latch	Default
	Function					Ø	Ø	Ø
M		EX2				ON	RUN	STOP		-ed
M1086	Enabling password function for DVP-	○	○	○	○	OFF	-	-	R/W	NO	OFF
	PCC01
	Matrix comparison.
M1088	Comparing between equivalent values	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	(M1088 = ON) or different values (M1088
	= OFF).
	Indicating the end of matrix comparison.
M1089	When the comparison reaches the last bit,	○	○	○	○	OFF	OFF	-	R	NO	OFF
	M1089 = ON.
	Indicating start of matrix comparison.
M1090	When the comparison starts from the first	○	○	○	○	OFF	OFF	-	R	NO	OFF
	bit, M1090 = ON.
	Indicating matrix searching results. When
M1091	the comparison has matched results,	○	○	○	○	OFF	OFF	-	R	NO	OFF
	comparison will stop immediately and
	M1091 = ON.
	Indicating pointer error. When the pointer
M1092	Pr exceeds the comparison range, M1092	○	○	○	○	OFF	OFF	-	R	NO	OFF
	= ON
M1093	Matrix pointer increasing flag. Adding 1 to	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	the current value of the Pr.
M1094	Matrix pointer clear flag. Clear the current	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	value of the Pr to 0
M1095	Carry flag for matrix rotation / shift /	○	○	○	○	OFF	OFF	-	R	NO	OFF
	output.
M1096	Borrow flag for matrix rotation/shift/input	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1097	Direction flag for matrix	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	rotation/displacement
M1098	Counting the number of bits which are “1”	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	or “0”
M1099	ON when the bits counting result is “0”	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1102*	Y2/CH1 (Y2, Y3) pulse output execution	○	○	○	○	OFF	-	-	R/W	NO	OFF
	completed
M1103*	Y3 pulse output completed	○	○	○	○	OFF	-	-	R/W	NO	OFF
M1104	Y2/CH1 (Y2, Y3) pulse output pause	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	(immediate)
M1105	Y3 pulse output pause (immediate)	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	Zero point selection. M1106=ON, change
M1106	the zero point to the right of DOG switch	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	for zero return on CH0.
	Zero point selection. M1107=ON, change
M1107	the zero point to the right of DOG switch	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	for zero return on CH1.
M1108	Y0/CH0 (Y0, Y1) pulse output pause	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	(ramp down)

2 - 20