Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual M1141 For COM2 RS-485, Modrd / Modwr

DVP - ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming

Special		ES2	SS2	SA2	SX2	OFF	STOP	RUN	Attrib.	Latch	Default
	Function					Ø	Ø	Ø
M		EX2				ON	RUN	STOP		-ed
M1141	For COM2 (RS-485), MODRD / MODWR	○	○	○	○	OFF	OFF	-	R	NO	OFF
	/ MODRW parameter error
M1142	Data receiving error of VFD-A handy	○	○	○	○	OFF	OFF	-	R	NO	OFF
	instructions
M1143*	For COM2(RS-485), ASCII/RTU mode	○	○	○	○	OFF	-	-	R/W	NO	OFF
	selection (OFF: ASCII; ON: RTU)
	Enabling the mask and alignment mark
M1156*	function on I400/I401(X4) corresponding	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	to Y0
	Enabling the mask and alignment mark
M1158*	function on I600/I601(X6) corresponding	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	to Y2
M1161	8/16 bit mode (ON = 8 bit mode)	○	○	○	○	OFF	-	-	R/W	NO	OFF
	Switching between decimal integer and
M1162	binary floating point for SCLP instruction.	○	○	○	○	OFF	-	-	R/W	NO	OFF
	ON: binary floating point; OFF: decimal
	integer
M1167	16-bit mode for HKY input	○	○	○	○	OFF	-	-	R/W	NO	OFF
M1168	Designating work mode of SMOV	○	○	○	○	OFF	-	-	R/W	NO	OFF
	Enable the communication instruction for
M1177	Delta VFD series inverter.	○	○	○	○	OFF	-	-	R/W	NO	OFF
	ON: VFD-A (Default), OFF: other models
	of VFD
M1178	Enable knob VR0	╳	╳	○	○	OFF	-	-	R/W	NO	OFF
M1179	Enable knob VR1	╳	╳	○	○	OFF	-	-	R/W	NO	OFF
	M1182 = ON, disable auto-mapping
	function when connected with left-side
	modules.
	„ For SA2 /SX2 models, values of AIO
	modules will be auto-mapped to
M1182	D9800 and above.	╳	╳	○	○	OFF	-	-	R/W	NO	OFF
	„ If the left side is connected with a
	communication module, additional 10
	words will be occupied. Ex: 04AD-SL
	+ EN01-SL + SA2, average value of
	Ch1~Ch4 of 04AD-SL maps to
	D9810~D9813.
	M1183 = ON, disable auto mapping
	function when connected with special
M1183	modules	○	○	○	○	#	-	-	R/W	NO	#
	#: ES2/EX2: OFF; SS2/SA2/SX2: ON
	(maps to D9900 and above)
M1190	Set Y0 high speed output as 0.01 ~	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	100Hz
M1191	Set Y1 high speed output as 0.01 ~ 100Hz	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1192	Set Y2 high speed output as 0.01 ~ 100Hz	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1193	Set Y3 high speed output as 0.01 ~ 100Hz	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1200	C200 counting mode (ON: count down)	○	○	○	○	OFF	-	-	R/W	NO	OFF
M1201	C201 counting mode (ON: count down)	○	○	○	○	OFF	-	-	R/W	NO	OFF
M1202	C202 counting mode ON: count down)	○	○	○	○	OFF	-	-	R/W	NO	OFF

2 - 22