Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual Error code Table Hex, Error code Description Action

DVP - ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming

6.2Error code Table (Hex)

After you write the program into the PLC, the illegal use of operands (devices) or incorrect syntax in the program will result in flashing of ERROR indicator and M1004 = ON. In this case, you can find out the cause of the error by checking the error code (hex) in special register D1004. The address where the error occurs is stored in the data register D1137. If the error is a general loop error, the address stored in D1137 will be invalid.

Error code	Description	Action
0001	Operand bit device S exceeds the valid range
0002	Label P exceeds the valid range or duplicated
0003	Operand KnSm exceeds the valid range
0102	Interrupt pointer I exceeds the valid range or duplicated
0202	Instruction MC exceeds the valid range
0302	Instruction MCR exceeds the valid range
0401	Operand bit device X exceeds the valid range
0403	Operand KnXm exceeds the valid range
0501	Operand bit device Y exceeds the valid range
0503	Operand KnYm exceeds the valid range
0601	Operand bit device T exceeds the valid range
0604	Operand word device T register exceeds limit	Check D1137 (Error
0801	Operand bit device M exceeds the valid range	step number)
0803	Operand KnMm exceeds the valid range	Re-enter the
0B01	Operand K, H available range error
		instruction correctly
0D01	DECO operand misuse
0D02	ENCO operand misuse
0D03	DHSCS operand misuse
0D04	DHSCR operand misuse
0D05	PLSY operand misuse
0D06	PWM operand misuse
0D07	FROM/TO operand misuse
0D08	PID operand misuse
0D09	SPD operand misuse
0D0A	DHSZ operand misuse
0D0B	IST operand misuse
0E01	Operand bit device C exceeds the valid range
0E04	Operand word device C register exceeds limit

6 - 4