Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming

¾There are 6 software zone comparators available exclusively for zone compare operation, hence the limit of 6 comparisons for zone compare does not include the comparisons of DHSCS and DHSCR.

¾SS2/SA2/SE does not support software counter C232.

5.Explanations on hardware comparators for HSZ instruction:

¾Corresponding table for hardware counters and comparators (It is not applicable to VEP-SE):

Hardware counter			A group					B group
	A1		A2	A3	A4	B1		B2	B3	B4
Counter No.	C243, C245~C248, C251,C252					C244, C249, C250, C253, C254
High-speed compare		Shares 4 hardware					Shares 4 hardware
Set/Reset	comparators for group A					comparators for group B

¾Corresponding table for hardware counters and comparators (It is only applicable to VEP-SE):

Hardware counter		A group			B group
	A1		A2	B1		B2
Counter No.	C243, C245~C248, C251,C252				C244
High-speed	Shares 2 hardware comparators			Shares 2 hardware
compare Set/Reset		for group A		comparators for group B

¾Block diagram of hardware counters and comparators:

		Hardware
		comparator A x 4	Set /reset	A1
			I010	A1
Hardware	Count
counter A	value A		Set /reset	A4
			I040	A4
		Hardware
		comparator B x 4	Set /res et	B1
			I050	B1
Hardware	Count
counter B	value B		Set /reset	B4
			I080	B4

¾The two groups can only be used once for each group, occupying 2 comparators. For example, when DHSZ instruction uses A3 and A4 of group A comparators, only the other 2 comparators (A1, A2) are available for DHSCS and DHSCR instructions.

¾When DHSCS uses I030 or I040, comparators A3 and A4 are no longer available for

3 - 132