Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual COM1, DVP-ES2-C

7 CANopen Function and Operation

Item	Explanation	Default
COM port	The serial port of computer used for communication	COM1
	with DVP-ES2-C.
Address	The communication address of DVP-ES2-C	01
Baud rate	The communication rate between computer and	9600 bps
	DVP-ES2-C
Data bits	The communication protocol between computer and	7
Parity		Even parity
	DVP-ES2-C
Stop bit		1
Mode	The communication mode between computer and	ASCII Mode
	DVP-ES2-C

3)After setting is finished, click “Network”> “Online” and the “Select communication channel” page appears.

1> When “CANopen Slave” displays in the Name column, it indicates that PLC is in the mode of CANopen slave. At that time, select “Simulated online” on the bottom left side on the page and finally click “OK” to start the online scanning.

2> When “CANopen Master” displays in the Name column, it indicates that PLC is in the mode of CANopen master. At that time, directly click “OK” to start the online scanning.

7 - 2 9