Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual D0 unit sec Unit 100 ms

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming

128. If ON duration of X0 is T sec, the relation between D0, D1 and n are shown as the table below.

n	D0 (unit: sec)	D1	(unit: 100 ms)
K0	T (sec) ×1	D1	= D0×10
K1	T (sec) ×10	D1	= D0
K2	T (sec) ×100	D1	= D0/10

Program Example 2:

129.Use TMR instruction to write in 10 groups of set time.

130.Write the set values into D100 ~ D109 in advance

131.The timer resolution is 0.1 sec for timers T0 ~ T9 and 1 sec for the teaching timer.

132.Connect the 1-bit DIP switch to X0 ~ X3 and use BIN instruction to convert the set value of the switch into a bin value and store it in E.

133.The ON duration (in sec) of X20 is stored in D200.

134.M0 is a pulse for one scan cycle generated when the teaching timer button X20 is released.

135.Use the set number of the DIP switch as the index pointer and send the content in D200 to D100E (D100 ~ D109).

M10

TMR T0 D100

M11

TMR T1 D101

M19

TMR T9 D109

M1000

BIN K1X0 E

X20

TTMR D200 K0

X20

PLF M0

M0

MOV D100 D200E

Note:

The TTMR instruction can only be used 8 times in a program. If TTMR is used in a CALL subroutine or interrupt subroutine, it only can be use once.

3 - 166