Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual Specifications

DVP - ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming

Specifications

			Timer interrupt	I602~I699, I702~I799, 2 points (Timer resolution =
				1ms)
			High-speed	I010, I020, I030, I040, I050, I060, I070, I080,8
			counter interrupt	points
			Communication	I140(COM1), I150(COM2), I160(COM3), 3 points,
			interrupt	(*3)
				K-32,768 ~ K32,767 (16-bit operation),
	K	Decimal		K-2,147,483,648 ~ K2,147,483,647 (32-bit
Constant				operation)
	H	Hexadecimal		H0000 ~ HFFFF (16-bit operation),
				H00000000 ~HFFFFFFFF (32-bit operation)
				COM1: built-in RS-232 ((Master/Slave)
Serial ports				COM2: built-in RS-485 (Master/Slave)
				COM3: built-in RS-485 (Master/Slave)
				COM1 is typically the programming port.
Real Time Clock				Year, Month, Day, Week, Hours, Minutes, Seconds
Special I/O Modules				Up to 8 special I/O modules can be connected

Notes:

1.Non-latched area cannot be modified

2.Latched area cannot be modified

3.COM1: built-in RS232 port. COM2: built-in RS485 port. COM3: built-in RS485 port.

4.When input points(X) are expanded to 256 points, only 16 output points(Y) are applicable. Also, when ouput points(Y) are expanded to 256 points, only 16 input points(X) are applicable.

5.This area is applicable only when the ES2/EX2 MPU is connected with special I/O modules. Every special I/O module occupies 10 points.

2 - 4